Profire 26/26 issue.

[melody_master85]

Ok so i am running pro-tools 8 m-powered on my mac and i have the profire 26/26 hooked up through firewire(obviously). I am recording a drumkit and can get all the signals of the mics into pro-tools and record them no problem but when i plug my headphones into the pro-fire to hear the drums while playing along i get nothing. I've looked through the routing screen but not exactly sure what i'm doing wrong.

[jagcmos]

Do you have the input sliders up/adjusted on the individual channels in the profire's software mixer ?

They can be adjusted and will not have a impact on the signal level being recorded in the daw.

I think the monitor outputs (usually channel 1 and 2) need to be routed to the mixer.

I don't own it the 2626, I'm just looking through the on-line pdf manual and thought this might help.

[melody_master85]

Well i'm not using a mixer though. It's just my drum mics plugged into the profire and the profire plugged into my mac running on pro-tools.

[jagcmos]

Originally Posted by melody_master85

Well i'm not using a mixer though. It's just my drum mics plugged into the profire and the profire plugged into my mac running on pro-tools.

No. I talking about the software mixer that came with your 2626.
You can use the software mixer to directly monitor your drums while recording.

[melody_master85]

Ah i see. I'll have to double check that. Ithought i routed 1 & 2 to the mixer but i could be wong.