Phantom Power Confusion!?

gosk · #1 (**permalink**) 10-18-2008, 10:50 PM

Hello,
I have a Tascam DP-02CF and i wanted to get more simultaneous Inputs, so I Bought a Yamaha MG-102C analog Mixer. Both have Phantom Power But i dont know which one to use for my Condenser Mic. I connected the Mixer using a *RCA TO PLUG* Rca (REC OUT) to my Tascam PLUG (Input A) so if i send Phantom power to a Plug input is there a problem? I understand its a very specific question and i hope to get a solid answer. Thank you

keyplayer · #2 (**permalink**) 10-18-2008, 10:56 PM

Whichever board you have your mic directly plugged into is the board that should have P-power turned on

brandondrury · #3 (**permalink**) 10-19-2008, 05:28 PM

I agree.

Brandon

gosk · #4 (**permalink**) 10-19-2008, 06:20 PM

Thank you, Now im ready to Rock n' Roll

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Phantom power? Preamps? what?	guyrecording	Solve Technical Issues	2	04-14-2008 11:33 PM
Phantom Power Requirements	Davejc	Solve Technical Issues	6	03-10-2008 03:16 AM
phantom power and	shure_1302	Solve Technical Issues	10	04-28-2007 07:39 PM
Behringer C1 Phantom power	skyjuice127	Solve Technical Issues	4	03-02-2007 02:28 PM
Audiofire12 and phantom power	cfdrums	Solve Technical Issues	4	01-04-2007 04:21 AM