 Re: Cubase 4 for Tascam US-122L
I have the same setup, and had the same problem. You need to go to Control Panel/Sound/Audio and make sure that you enable the US-122L as your soundcard. You probably need to select the Properties for Mixer and Audio and say you want to use the Mixer and Audio properties of the interface, MIDI too.
You may also need to download the firmware updater and do that. It's very easy.
Once your system finds the interface, then Cubase should automatically find it. Then you need to go into Device Setup in Cubase and select the interface for your Ins/Outs/MIDI device.
Hope this helps!
-DR
|