 Re: Impedance matching - not as noob as it sounds.
if you are freewheeling down Pikes Peak in a loaded Semi, impedance(resistance) is your brakes. A static resistance measurement does not indicate what load it presents when ****ed-up and working.
I always tended to just think in terms of low - 4 ohm, medium - 8 ohm, and high 16 ohm. There are variations, but just present a load that's in the rated ballpark. You can put you meter across one disconnected plug lead to see what it reads in circuit with the amp on and working with signal.
__________________
pss790, K1, d-5, x-fi notebook, !live and vortex2, turser p90 sg, Ibanez steel string, Bongos, Washboard, etc. : ), Roberts 770 w/dual EF86 mono-blocks, cedar ridge acoustic
|